Changed Config.h and config_adv.h to example files
Jetzt geht alles, jay! Man muss nur die beiden Z-Motoren vertauschen, don't know why
This commit is contained in:
parent
feee5bfda5
commit
d812e4a03f
File diff suppressed because it is too large
Load Diff
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "config/examples/AnyCubic/i3 Mega/Trigorilla AVR"
|
||||
|
||||
/**
|
||||
* Configuration_adv.h
|
||||
*
|
||||
|
|
@ -50,9 +52,6 @@
|
|||
*/
|
||||
//#define CONFIG_EXPORT 2 // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
|
||||
|
||||
#define KNUTWURST_MEGAS_ADV
|
||||
#define KNUTWURST_TMC_ADV
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
|
@ -197,8 +196,6 @@
|
|||
*/
|
||||
//#define HEPHESTOS2_HEATED_BED_KIT
|
||||
#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
|
||||
#undef TEMP_SENSOR_BED
|
||||
#define TEMP_SENSOR_BED 70
|
||||
#define HEATER_BED_INVERTING true
|
||||
#endif
|
||||
|
||||
|
|
@ -301,15 +298,8 @@
|
|||
* THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||
#if ENABLED(KNUTWURST_CHIRON)
|
||||
#define THERMAL_PROTECTION_PERIOD 30 // (seconds)
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 20 // (°C)
|
||||
|
||||
#define WATCH_TEMP_PERIOD 60 // (seconds)
|
||||
#define WATCH_TEMP_INCREASE 5 // (°C)
|
||||
#else
|
||||
#define THERMAL_PROTECTION_PERIOD 20 // (seconds)
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 15 // (°C)
|
||||
#define THERMAL_PROTECTION_PERIOD 40 // (seconds)
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // (°C)
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
|
|
@ -328,34 +318,22 @@
|
|||
* and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
|
||||
* below 2.
|
||||
*/
|
||||
#define WATCH_TEMP_PERIOD 30 // (seconds)
|
||||
#define WATCH_TEMP_INCREASE 3 // (°C)
|
||||
#endif
|
||||
#define WATCH_TEMP_PERIOD 40 // (seconds)
|
||||
#define WATCH_TEMP_INCREASE 2 // (°C)
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the bed are just as above for hotends.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_BED)
|
||||
#if ENABLED(KNUTWURST_CHIRON)
|
||||
#define THERMAL_PROTECTION_BED_PERIOD 120 // (seconds)
|
||||
#define THERMAL_PROTECTION_BED_HYSTERESIS 15 // (°C)
|
||||
|
||||
/**
|
||||
* As described above, except for the bed (M140/M190/M303).
|
||||
*/
|
||||
#define WATCH_BED_TEMP_PERIOD 300 // (seconds)
|
||||
#define WATCH_BED_TEMP_INCREASE 2 // (°C)
|
||||
#else
|
||||
#define THERMAL_PROTECTION_BED_PERIOD 30 // (seconds)
|
||||
#define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds)
|
||||
#define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C)
|
||||
|
||||
/**
|
||||
* As described above, except for the bed (M140/M190/M303).
|
||||
*/
|
||||
#define WATCH_BED_TEMP_PERIOD 120 // (seconds)
|
||||
#define WATCH_BED_TEMP_PERIOD 60 // (seconds)
|
||||
#define WATCH_BED_TEMP_INCREASE 2 // (°C)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -501,11 +479,7 @@
|
|||
|
||||
// The number of consecutive low temperature errors that can occur
|
||||
// before a MINTEMP error is triggered. (Shouldn't be more than 10.)
|
||||
#if ENABLED(KNUTWURST_CHIRON)
|
||||
#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 3
|
||||
#else
|
||||
// #define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
|
||||
#endif
|
||||
//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
|
||||
|
||||
/**
|
||||
* The number of milliseconds a hotend will preheat before starting to check
|
||||
|
|
@ -730,15 +704,12 @@
|
|||
* @section caselight
|
||||
* M355 Case Light on-off / brightness
|
||||
*/
|
||||
#if ENABLED(KNUTWURST_4MAXP2)
|
||||
#define CASE_LIGHT_ENABLE
|
||||
#endif
|
||||
|
||||
//#define CASE_LIGHT_ENABLE
|
||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||
#define CASE_LIGHT_PIN 45 // Override the default pin if needed
|
||||
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin)
|
||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||
//#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting.
|
||||
//#define CASE_LIGHT_MAX_PWM 128 // Limit PWM duty cycle (0-255)
|
||||
//#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
|
||||
|
|
@ -867,9 +838,7 @@
|
|||
#ifdef Z2_DRIVER_TYPE
|
||||
//#define INVERT_Z2_VS_Z_DIR // Z2 direction signal is the opposite of Z
|
||||
|
||||
#if DISABLED(KNUTWURST_ONE_Z_ENDSTOP)
|
||||
#define Z_MULTI_ENDSTOPS // Other Z axes have their own endstops
|
||||
#endif
|
||||
#if ENABLED(Z_MULTI_ENDSTOPS)
|
||||
#define Z2_USE_ENDSTOP _XMAX_ // Z2 endstop board plug. Don't forget to enable USE_*_PLUG.
|
||||
#define Z2_ENDSTOP_ADJUSTMENT 0 // Z2 offset relative to Z endstop
|
||||
|
|
@ -877,11 +846,7 @@
|
|||
#ifdef Z3_DRIVER_TYPE
|
||||
//#define INVERT_Z3_VS_Z_DIR // Z3 direction signal is the opposite of Z
|
||||
#if ENABLED(Z_MULTI_ENDSTOPS)
|
||||
#if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P, KNUTWURST_MEGA_X)
|
||||
#define Z3_USE_ENDSTOP _YMAX_ // Z3 endstop board plug. Don't forget to enable USE_*_PLUG.
|
||||
#elif ENABLED(KNUTWURST_CHIRON)
|
||||
#define Z2_USE_ENDSTOP _XMAX_
|
||||
#endif
|
||||
#define Z3_ENDSTOP_ADJUSTMENT 0 // Z3 offset relative to Z endstop
|
||||
#endif
|
||||
#endif
|
||||
|
|
@ -919,10 +884,8 @@
|
|||
#define HOMING_BUMP_MM { 5, 5, 2 } // (linear=mm, rotational=°) Backoff from endstops after first bump
|
||||
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||
|
||||
#if DISABLED(KNUTWURST_CHIRON)
|
||||
#define HOMING_BACKOFF_POST_MM { 2, 2, 0 } // (linear=mm, rotational=°) Backoff from endstops after homing
|
||||
#endif
|
||||
// #define XY_COUNTERPART_BACKOFF_MM 0 // (mm) Backoff X after homing Y, and vice-versa
|
||||
//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (linear=mm, rotational=°) Backoff from endstops after homing
|
||||
//#define XY_COUNTERPART_BACKOFF_MM 0 // (mm) Backoff X after homing Y, and vice-versa
|
||||
|
||||
//#define QUICK_HOME // If G28 contains XY do a diagonal move first
|
||||
//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X
|
||||
|
|
@ -996,7 +959,7 @@
|
|||
*
|
||||
* Set the default state here, change with 'M401 S' or UI, use M500 to save, M502 to reset.
|
||||
*/
|
||||
#define BLTOUCH_HS_MODE false
|
||||
//#define BLTOUCH_HS_MODE true
|
||||
|
||||
|
||||
#endif // BLTOUCH
|
||||
|
|
@ -1523,12 +1486,12 @@
|
|||
#endif // HAS_DISPLAY || DWIN_LCD_PROUI
|
||||
|
||||
// Add 'M73' to set print job progress, overrides Marlin's built-in estimate
|
||||
#define SET_PROGRESS_MANUALLY
|
||||
//#define SET_PROGRESS_MANUALLY
|
||||
#if ENABLED(SET_PROGRESS_MANUALLY)
|
||||
#define SET_PROGRESS_PERCENT // Add 'P' parameter to set percentage done
|
||||
#define SET_REMAINING_TIME // Add 'R' parameter to set remaining time
|
||||
#define SET_INTERACTION_TIME // Add 'C' parameter to set time until next filament change or other user interaction
|
||||
#define M73_REPORT // Report M73 values to host
|
||||
//#define SET_INTERACTION_TIME // Add 'C' parameter to set time until next filament change or other user interaction
|
||||
//#define M73_REPORT // Report M73 values to host
|
||||
#if BOTH(M73_REPORT, SDSUPPORT)
|
||||
#define M73_REPORT_SD_ONLY // Report only when printing from SD
|
||||
#endif
|
||||
|
|
@ -1575,12 +1538,12 @@
|
|||
//#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up
|
||||
//#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash)
|
||||
|
||||
#define GCODE_REPEAT_MARKERS // Enable G-code M808 to set repeat markers and do looping
|
||||
//#define GCODE_REPEAT_MARKERS // Enable G-code M808 to set repeat markers and do looping
|
||||
|
||||
#define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls
|
||||
|
||||
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
|
||||
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // Use "M84XYE" to keep Z enabled so your bed stays in place
|
||||
#define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place
|
||||
|
||||
// Reverse SD sort to show "more recent" files first, according to the card's FAT.
|
||||
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
|
||||
|
|
@ -1595,7 +1558,7 @@
|
|||
|
||||
//#define MEDIA_MENU_AT_TOP // Force the media menu to be listed on the top of the main menu
|
||||
|
||||
#define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
|
||||
#define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
|
||||
|
||||
#if ENABLED(PRINTER_EVENT_LEDS)
|
||||
#define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
|
||||
|
|
@ -1655,15 +1618,15 @@
|
|||
* - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!)
|
||||
* - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!)
|
||||
*/
|
||||
#define SDCARD_SORT_ALPHA
|
||||
//#define SDCARD_SORT_ALPHA
|
||||
|
||||
// SD Card Sorting options
|
||||
#if ENABLED(SDCARD_SORT_ALPHA)
|
||||
#define SDSORT_LIMIT 20 // Maximum number of sorted items (10-256). Costs 27 bytes each.
|
||||
#define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.
|
||||
#define SDSORT_FOLDERS -1 // -1=above 0=none 1=below
|
||||
#define SDSORT_GCODE false // Enable G-code M34 to set sorting behaviors: M34 S<-1|0|1> F<-1|0|1>
|
||||
#define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting.
|
||||
#define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
|
||||
#define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.
|
||||
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
|
||||
#define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
|
||||
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
|
||||
#define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
|
||||
|
|
@ -2102,11 +2065,11 @@
|
|||
*
|
||||
* Warning: Does not respect endstops!
|
||||
*/
|
||||
#define BABYSTEPPING
|
||||
//#define BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
//#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
|
||||
//#define BABYSTEP_WITHOUT_HOMING
|
||||
#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement)
|
||||
//#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement)
|
||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||
//#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
|
||||
|
|
@ -2125,10 +2088,7 @@
|
|||
|
||||
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
|
||||
|
||||
#if ENABLED(KNUTWURST_BLTOUCH)
|
||||
#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
#endif
|
||||
|
||||
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
||||
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
|
||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||
|
|
@ -2155,9 +2115,9 @@
|
|||
#define LIN_ADVANCE
|
||||
#if ENABLED(LIN_ADVANCE)
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
|
||||
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
|
||||
#else
|
||||
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
|
||||
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
|
||||
#endif
|
||||
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
|
||||
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
|
||||
|
|
@ -2214,21 +2174,19 @@
|
|||
* probe points will follow. This prevents any change from causing
|
||||
* the probe to be unable to reach any points.
|
||||
*/
|
||||
#if ENABLED(KNUTWURST_BLTOUCH)
|
||||
#if PROBE_SELECTED && !IS_KINEMATIC
|
||||
#define PROBING_MARGIN_LEFT 10
|
||||
#define PROBING_MARGIN_RIGHT 10
|
||||
#define PROBING_MARGIN_FRONT 10
|
||||
#define PROBING_MARGIN_BACK 10
|
||||
#endif
|
||||
#if PROBE_SELECTED && !IS_KINEMATIC
|
||||
//#define PROBING_MARGIN_LEFT PROBING_MARGIN
|
||||
//#define PROBING_MARGIN_RIGHT PROBING_MARGIN
|
||||
//#define PROBING_MARGIN_FRONT PROBING_MARGIN
|
||||
//#define PROBING_MARGIN_BACK PROBING_MARGIN
|
||||
#endif
|
||||
|
||||
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
#define MESH_MIN_X MESH_INSET
|
||||
#define MESH_MIN_Y MESH_INSET
|
||||
#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
|
||||
#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
|
||||
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
|
||||
#endif
|
||||
|
||||
#if BOTH(AUTO_BED_LEVELING_UBL, EEPROM_SETTINGS)
|
||||
|
|
@ -2338,7 +2296,7 @@
|
|||
#define MIN_CIRCLE_SEGMENTS 72 // Minimum number of segments in a complete circle
|
||||
//#define ARC_SEGMENTS_PER_SEC 50 // Use the feedrate to choose the segment length
|
||||
#define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections
|
||||
#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
|
||||
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
|
||||
//#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure
|
||||
#endif
|
||||
|
||||
|
|
@ -2390,10 +2348,8 @@
|
|||
*
|
||||
* Override the default value based on the driver type set in Configuration.h.
|
||||
*/
|
||||
#if NONE(KNUTWURST_MEGA_P, KNUTWURST_TMC)
|
||||
// #define MINIMUM_STEPPER_POST_DIR_DELAY 200
|
||||
// #define MINIMUM_STEPPER_PRE_DIR_DELAY 200
|
||||
#endif
|
||||
//#define MINIMUM_STEPPER_POST_DIR_DELAY 650
|
||||
//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
|
||||
|
||||
/**
|
||||
* Minimum stepper driver pulse width (in µs)
|
||||
|
|
@ -2406,9 +2362,8 @@
|
|||
*
|
||||
* Override the default value based on the driver type set in Configuration.h.
|
||||
*/
|
||||
#if NONE(KNUTWURST_MEGA_P, KNUTWURST_TMC)
|
||||
// #define MINIMUM_STEPPER_PULSE 1
|
||||
#endif
|
||||
//#define MINIMUM_STEPPER_PULSE 2
|
||||
|
||||
/**
|
||||
* Maximum stepping rate (in Hz) the stepper driver allows
|
||||
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
|
||||
|
|
@ -2434,20 +2389,6 @@
|
|||
|
||||
// @section gcode
|
||||
|
||||
/*
|
||||
#if ENABLED(KNUTWURST_CHIRON)
|
||||
#if ENABLED(SDSUPPORT)
|
||||
#define BLOCK_BUFFER_SIZE 8 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||
#else
|
||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||
#endif
|
||||
|
||||
#define MAX_CMD_SIZE 96
|
||||
#define BUFSIZE 4
|
||||
#define TX_BUFFER_SIZE 0
|
||||
#define RX_BUFFER_SIZE 64
|
||||
#else
|
||||
*/
|
||||
// The number of linear moves that can be in the planner at once.
|
||||
// The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g., 8, 16, 32)
|
||||
#if BOTH(SDSUPPORT, DIRECT_STEPPING)
|
||||
|
|
@ -2471,19 +2412,18 @@
|
|||
// For debug-echo: 128 bytes for the optimal speed.
|
||||
// Other output doesn't need to be that speedy.
|
||||
// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
|
||||
#define TX_BUFFER_SIZE 0
|
||||
#define TX_BUFFER_SIZE 4
|
||||
|
||||
// Host Receive Buffer Size
|
||||
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
|
||||
// To use flow control, set this buffer size to at least 1024 bytes.
|
||||
// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
|
||||
#define RX_BUFFER_SIZE 256
|
||||
// #endif
|
||||
|
||||
#if RX_BUFFER_SIZE >= 1024
|
||||
// Enable to have the controller send XON/XOFF control characters to
|
||||
// the host to signal the RX buffer is becoming full.
|
||||
#define SERIAL_XON_XOFF
|
||||
//#define SERIAL_XON_XOFF
|
||||
#endif
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
|
@ -2711,51 +2651,10 @@
|
|||
*/
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#if ENABLED(KNUTWURST_4MAXP2)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 40 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract.
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 50 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 5 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
|
||||
// 0 to disable start loading and skip to fast load only
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 30 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 10 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#endif
|
||||
|
||||
#if ENABLED(KNUTWURST_CHIRON)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 40 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 5 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
|
||||
// 0 to disable start loading and skip to fast load only
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 30 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 550 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#endif
|
||||
|
||||
#if NONE(KNUTWURST_CHIRON, KNUTWURST_4MAXP2)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 40 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 555 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
|
|
@ -2764,21 +2663,19 @@
|
|||
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
|
||||
// 0 to disable start loading and skip to fast load only
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 30 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 538 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#endif
|
||||
|
||||
#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
|
||||
#define ADVANCED_PAUSE_PURGE_FEEDRATE 2 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_PURGE_LENGTH 2 // (mm) Length to extrude after loading.
|
||||
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
|
||||
#define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_PURGE_LENGTH 60 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
//#define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park.
|
||||
#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
|
||||
#define ADVANCED_PAUSE_RESUME_PRIME 2 // (mm) Extra distance to prime nozzle after returning from park.
|
||||
//#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length.
|
||||
|
|
@ -2786,11 +2683,11 @@
|
|||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
#define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 300 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
//#define FILAMENT_CHANGE_RESUME_ON_INSERT // Automatically continue / load filament when runout sensor is triggered again.
|
||||
#define PAUSE_REHEAT_FAST_RESUME // Reduce number of waits by not prompting again post-timeout before continuing.
|
||||
//#define PAUSE_REHEAT_FAST_RESUME // Reduce number of waits by not prompting again post-timeout before continuing.
|
||||
|
||||
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
|
||||
|
|
@ -3100,28 +2997,28 @@
|
|||
* Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
|
||||
* on the same serial port, either here or in your board's pins file.
|
||||
*/
|
||||
#define X_SLAVE_ADDRESS 0
|
||||
#define Y_SLAVE_ADDRESS 0
|
||||
#define Z_SLAVE_ADDRESS 0
|
||||
#define X2_SLAVE_ADDRESS 0
|
||||
#define Y2_SLAVE_ADDRESS 0
|
||||
#define Z2_SLAVE_ADDRESS 0
|
||||
#define Z3_SLAVE_ADDRESS 0
|
||||
#define Z4_SLAVE_ADDRESS 0
|
||||
#define I_SLAVE_ADDRESS 0
|
||||
#define J_SLAVE_ADDRESS 0
|
||||
#define K_SLAVE_ADDRESS 0
|
||||
#define U_SLAVE_ADDRESS 0
|
||||
#define V_SLAVE_ADDRESS 0
|
||||
#define W_SLAVE_ADDRESS 0
|
||||
#define E0_SLAVE_ADDRESS 0
|
||||
#define E1_SLAVE_ADDRESS 0
|
||||
#define E2_SLAVE_ADDRESS 0
|
||||
#define E3_SLAVE_ADDRESS 0
|
||||
#define E4_SLAVE_ADDRESS 0
|
||||
#define E5_SLAVE_ADDRESS 0
|
||||
#define E6_SLAVE_ADDRESS 0
|
||||
#define E7_SLAVE_ADDRESS 0
|
||||
//#define X_SLAVE_ADDRESS 0
|
||||
//#define Y_SLAVE_ADDRESS 0
|
||||
//#define Z_SLAVE_ADDRESS 0
|
||||
//#define X2_SLAVE_ADDRESS 0
|
||||
//#define Y2_SLAVE_ADDRESS 0
|
||||
//#define Z2_SLAVE_ADDRESS 0
|
||||
//#define Z3_SLAVE_ADDRESS 0
|
||||
//#define Z4_SLAVE_ADDRESS 0
|
||||
//#define I_SLAVE_ADDRESS 0
|
||||
//#define J_SLAVE_ADDRESS 0
|
||||
//#define K_SLAVE_ADDRESS 0
|
||||
//#define U_SLAVE_ADDRESS 0
|
||||
//#define V_SLAVE_ADDRESS 0
|
||||
//#define W_SLAVE_ADDRESS 0
|
||||
//#define E0_SLAVE_ADDRESS 0
|
||||
//#define E1_SLAVE_ADDRESS 0
|
||||
//#define E2_SLAVE_ADDRESS 0
|
||||
//#define E3_SLAVE_ADDRESS 0
|
||||
//#define E4_SLAVE_ADDRESS 0
|
||||
//#define E5_SLAVE_ADDRESS 0
|
||||
//#define E6_SLAVE_ADDRESS 0
|
||||
//#define E7_SLAVE_ADDRESS 0
|
||||
|
||||
// @section tmc/smart
|
||||
|
||||
|
|
@ -3434,15 +3331,8 @@
|
|||
*
|
||||
* See https://marlinfw.org/docs/configuration/2.0.9/laser_spindle.html for more config details.
|
||||
*/
|
||||
// #define SPINDLE_FEATURE
|
||||
|
||||
#if ENABLED(KNUTWURST_MEGA_P)
|
||||
#define LASER_FEATURE
|
||||
|
||||
#define SPINDLE_LASER_ENA_PIN 40 // D40 should be unused. The laser is only connected to the PWM output.
|
||||
#define SPINDLE_LASER_PWM_PIN HEATER_0_PIN
|
||||
#endif
|
||||
|
||||
//#define SPINDLE_FEATURE
|
||||
//#define LASER_FEATURE
|
||||
#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
|
||||
#define SPINDLE_LASER_ACTIVE_STATE LOW // Set to "HIGH" if SPINDLE_LASER_ENA_PIN is active HIGH
|
||||
|
||||
|
|
@ -3801,8 +3691,8 @@
|
|||
/**
|
||||
* Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
|
||||
*/
|
||||
#define MEATPACK_ON_SERIAL_PORT_1
|
||||
#define MEATPACK_ON_SERIAL_PORT_2
|
||||
//#define MEATPACK_ON_SERIAL_PORT_1
|
||||
//#define MEATPACK_ON_SERIAL_PORT_2
|
||||
|
||||
//#define GCODE_CASE_INSENSITIVE // Accept G-code sent to the firmware in lowercase
|
||||
|
||||
|
|
@ -3875,17 +3765,17 @@
|
|||
#define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
|
||||
//#define MAIN_MENU_ITEM_2_CONFIRM
|
||||
|
||||
#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
|
||||
#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
|
||||
// #define MAIN_MENU_ITEM_3_CONFIRM
|
||||
//#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL
|
||||
//#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
|
||||
//#define MAIN_MENU_ITEM_3_CONFIRM
|
||||
|
||||
#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
|
||||
#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
|
||||
// #define MAIN_MENU_ITEM_4_CONFIRM
|
||||
//#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level"
|
||||
//#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
|
||||
//#define MAIN_MENU_ITEM_4_CONFIRM
|
||||
|
||||
#define MAIN_MENU_ITEM_5_DESC "Home & Info"
|
||||
#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
|
||||
// #define MAIN_MENU_ITEM_5_CONFIRM
|
||||
//#define MAIN_MENU_ITEM_5_DESC "Home & Info"
|
||||
//#define MAIN_MENU_ITEM_5_GCODE "G28\nM503"
|
||||
//#define MAIN_MENU_ITEM_5_CONFIRM
|
||||
#endif
|
||||
|
||||
// @section custom config menu
|
||||
|
|
@ -3971,10 +3861,10 @@
|
|||
*/
|
||||
#define HOST_ACTION_COMMANDS
|
||||
#if ENABLED(HOST_ACTION_COMMANDS)
|
||||
#define HOST_PAUSE_M76 // Tell the host to pause in response to M76
|
||||
//#define HOST_PAUSE_M76 // Tell the host to pause in response to M76
|
||||
#define HOST_PROMPT_SUPPORT // Initiate host prompts to get user feedback
|
||||
#if ENABLED(HOST_PROMPT_SUPPORT)
|
||||
#define HOST_STATUS_NOTIFICATIONS // Send some status messages to the host as notifications
|
||||
//#define HOST_STATUS_NOTIFICATIONS // Send some status messages to the host as notifications
|
||||
#endif
|
||||
//#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start
|
||||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
|
|
|
|||
|
|
@ -0,0 +1,507 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* Whenever changes are made to this file, please update Marlin/Makefile
|
||||
* and _data/boards.yml in the MarlinDocumentation repo.
|
||||
*/
|
||||
|
||||
#include "macros.h"
|
||||
|
||||
#define BOARD_UNKNOWN -1
|
||||
|
||||
//
|
||||
// RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560
|
||||
//
|
||||
|
||||
#define BOARD_RAMPS_OLD 1000 // MEGA/RAMPS up to 1.2
|
||||
|
||||
#define BOARD_RAMPS_13_EFB 1010 // RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_13_EEB 1011 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_13_EFF 1012 // RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_13_EEF 1013 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_13_SF 1014 // RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
|
||||
|
||||
#define BOARD_RAMPS_14_EFB 1020 // RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_14_EEB 1021 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_14_EFF 1022 // RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_14_EEF 1023 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_14_SF 1024 // RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
|
||||
|
||||
#define BOARD_RAMPS_PLUS_EFB 1030 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_PLUS_EEB 1031 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_PLUS_EFF 1032 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_PLUS_EEF 1033 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_PLUS_SF 1034 // RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
|
||||
|
||||
//
|
||||
// RAMPS Derivatives - ATmega1280, ATmega2560
|
||||
//
|
||||
|
||||
#define BOARD_3DRAG 1100 // 3Drag Controller
|
||||
#define BOARD_K8200 1101 // Velleman K8200 Controller (derived from 3Drag Controller)
|
||||
#define BOARD_K8400 1102 // Velleman K8400 Controller (derived from 3Drag Controller)
|
||||
#define BOARD_K8600 1103 // Velleman K8600 Controller (Vertex Nano)
|
||||
#define BOARD_K8800 1104 // Velleman K8800 Controller (Vertex Delta)
|
||||
#define BOARD_BAM_DICE 1105 // 2PrintBeta BAM&DICE with STK drivers
|
||||
#define BOARD_BAM_DICE_DUE 1106 // 2PrintBeta BAM&DICE Due with STK drivers
|
||||
#define BOARD_MKS_BASE 1107 // MKS BASE v1.0
|
||||
#define BOARD_MKS_BASE_14 1108 // MKS BASE v1.4 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_15 1109 // MKS BASE v1.5 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_16 1110 // MKS BASE v1.6 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_HEROIC 1111 // MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
#define BOARD_MKS_GEN_13 1112 // MKS GEN v1.3 or 1.4
|
||||
#define BOARD_MKS_GEN_L 1113 // MKS GEN L
|
||||
#define BOARD_KFB_2 1114 // BigTreeTech or BIQU KFB2.0
|
||||
#define BOARD_ZRIB_V20 1115 // zrib V2.0 (Chinese RAMPS replica)
|
||||
#define BOARD_ZRIB_V52 1116 // zrib V5.2 (Chinese RAMPS replica)
|
||||
#define BOARD_FELIX2 1117 // Felix 2.0+ Electronics Board (RAMPS like)
|
||||
#define BOARD_RIGIDBOARD 1118 // Invent-A-Part RigidBoard
|
||||
#define BOARD_RIGIDBOARD_V2 1119 // Invent-A-Part RigidBoard V2
|
||||
#define BOARD_SAINSMART_2IN1 1120 // Sainsmart 2-in-1 board
|
||||
#define BOARD_ULTIMAKER 1121 // Ultimaker
|
||||
#define BOARD_ULTIMAKER_OLD 1122 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
#define BOARD_AZTEEG_X3 1123 // Azteeg X3
|
||||
#define BOARD_AZTEEG_X3_PRO 1124 // Azteeg X3 Pro
|
||||
#define BOARD_ULTIMAIN_2 1125 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
#define BOARD_RUMBA 1126 // Rumba
|
||||
#define BOARD_RUMBA_RAISE3D 1127 // Raise3D N series Rumba derivative
|
||||
#define BOARD_RL200 1128 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
|
||||
#define BOARD_FORMBOT_TREX2PLUS 1129 // Formbot T-Rex 2 Plus
|
||||
#define BOARD_FORMBOT_TREX3 1130 // Formbot T-Rex 3
|
||||
#define BOARD_FORMBOT_RAPTOR 1131 // Formbot Raptor
|
||||
#define BOARD_FORMBOT_RAPTOR2 1132 // Formbot Raptor 2
|
||||
#define BOARD_BQ_ZUM_MEGA_3D 1133 // bq ZUM Mega 3D
|
||||
#define BOARD_MAKEBOARD_MINI 1134 // MakeBoard Mini v2.1.2 by MicroMake
|
||||
#define BOARD_TRIGORILLA_13 1135 // TriGorilla Anycubic version 1.3-based on RAMPS EFB
|
||||
#define BOARD_TRIGORILLA_14 1136 // ... Ver 1.4
|
||||
#define BOARD_TRIGORILLA_14_11 1137 // ... Rev 1.1 (new servo pin order)
|
||||
#define BOARD_RAMPS_ENDER_4 1138 // Creality: Ender-4, CR-8
|
||||
#define BOARD_RAMPS_CREALITY 1139 // Creality: CR10S, CR20, CR-X
|
||||
#define BOARD_DAGOMA_F5 1140 // Dagoma F5
|
||||
#define BOARD_FYSETC_F6_13 1141 // FYSETC F6 1.3
|
||||
#define BOARD_FYSETC_F6_14 1142 // FYSETC F6 1.4
|
||||
#define BOARD_DUPLICATOR_I3_PLUS 1143 // Wanhao Duplicator i3 Plus
|
||||
#define BOARD_VORON 1144 // VORON Design
|
||||
#define BOARD_TRONXY_V3_1_0 1145 // Tronxy TRONXY-V3-1.0
|
||||
#define BOARD_Z_BOLT_X_SERIES 1146 // Z-Bolt X Series
|
||||
#define BOARD_TT_OSCAR 1147 // TT OSCAR
|
||||
#define BOARD_OVERLORD 1148 // Overlord/Overlord Pro
|
||||
#define BOARD_HJC2560C_REV1 1149 // ADIMLab Gantry v1
|
||||
#define BOARD_HJC2560C_REV2 1150 // ADIMLab Gantry v2
|
||||
#define BOARD_TANGO 1151 // BIQU Tango V1
|
||||
#define BOARD_MKS_GEN_L_V2 1152 // MKS GEN L V2
|
||||
#define BOARD_MKS_GEN_L_V21 1153 // MKS GEN L V2.1
|
||||
#define BOARD_COPYMASTER_3D 1154 // Copymaster 3D
|
||||
#define BOARD_ORTUR_4 1155 // Ortur 4
|
||||
#define BOARD_TENLOG_D3_HERO 1156 // Tenlog D3 Hero IDEX printer
|
||||
#define BOARD_TENLOG_MB1_V23 1157 // Tenlog D3, D5, D6 IDEX Printer
|
||||
#define BOARD_RAMPS_S_12_EEFB 1158 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
||||
#define BOARD_RAMPS_S_12_EEEB 1159 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed)
|
||||
#define BOARD_RAMPS_S_12_EFFB 1160 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed)
|
||||
#define BOARD_LONGER3D_LK1_PRO 1161 // Longer LK1 PRO / Alfawise U20 Pro (PRO version)
|
||||
#define BOARD_LONGER3D_LKx_PRO 1162 // Longer LKx PRO / Alfawise Uxx Pro (PRO version)
|
||||
#define BOARD_ZRIB_V53 1163 // Zonestar zrib V5.3 (Chinese RAMPS replica)
|
||||
#define BOARD_PXMALION_CORE_I3 1164 // Pxmalion Core I3
|
||||
// PATCH START: Knutwurst
|
||||
#define BOARD_TRIGORILLA_CHIRON 1165 // TriGorilla Anycubic version 1.4 based on RAMPS EFB for Chiron
|
||||
// PATCH END: Knutwurst
|
||||
|
||||
//
|
||||
// RAMBo and derivatives
|
||||
//
|
||||
|
||||
#define BOARD_RAMBO 1200 // Rambo
|
||||
#define BOARD_MINIRAMBO 1201 // Mini-Rambo
|
||||
#define BOARD_MINIRAMBO_10A 1202 // Mini-Rambo 1.0a
|
||||
#define BOARD_EINSY_RAMBO 1203 // Einsy Rambo
|
||||
#define BOARD_EINSY_RETRO 1204 // Einsy Retro
|
||||
#define BOARD_SCOOVO_X9H 1205 // abee Scoovo X9H
|
||||
#define BOARD_RAMBO_THINKERV2 1206 // ThinkerV2
|
||||
|
||||
//
|
||||
// Other ATmega1280, ATmega2560
|
||||
//
|
||||
|
||||
#define BOARD_CNCONTROLS_11 1300 // Cartesio CN Controls V11
|
||||
#define BOARD_CNCONTROLS_12 1301 // Cartesio CN Controls V12
|
||||
#define BOARD_CNCONTROLS_15 1302 // Cartesio CN Controls V15
|
||||
#define BOARD_CHEAPTRONIC 1303 // Cheaptronic v1.0
|
||||
#define BOARD_CHEAPTRONIC_V2 1304 // Cheaptronic v2.0
|
||||
#define BOARD_MIGHTYBOARD_REVE 1305 // Makerbot Mightyboard Revision E
|
||||
#define BOARD_MEGATRONICS 1306 // Megatronics
|
||||
#define BOARD_MEGATRONICS_2 1307 // Megatronics v2.0
|
||||
#define BOARD_MEGATRONICS_3 1308 // Megatronics v3.0
|
||||
#define BOARD_MEGATRONICS_31 1309 // Megatronics v3.1
|
||||
#define BOARD_MEGATRONICS_32 1310 // Megatronics v3.2
|
||||
#define BOARD_ELEFU_3 1311 // Elefu Ra Board (v3)
|
||||
#define BOARD_LEAPFROG 1312 // Leapfrog
|
||||
#define BOARD_MEGACONTROLLER 1313 // Mega controller
|
||||
#define BOARD_GT2560_REV_A 1314 // Geeetech GT2560 Rev A
|
||||
#define BOARD_GT2560_REV_A_PLUS 1315 // Geeetech GT2560 Rev A+ (with auto level probe)
|
||||
#define BOARD_GT2560_REV_B 1316 // Geeetech GT2560 Rev B
|
||||
#define BOARD_GT2560_V3 1317 // Geeetech GT2560 Rev B for A10(M/T/D)
|
||||
#define BOARD_GT2560_V4 1318 // Geeetech GT2560 Rev B for A10(M/T/D)
|
||||
#define BOARD_GT2560_V3_MC2 1319 // Geeetech GT2560 Rev B for Mecreator2
|
||||
#define BOARD_GT2560_V3_A20 1320 // Geeetech GT2560 Rev B for A20(M/T/D)
|
||||
#define BOARD_EINSTART_S 1321 // Einstart retrofit
|
||||
#define BOARD_WANHAO_ONEPLUS 1322 // Wanhao 0ne+ i3 Mini
|
||||
#define BOARD_LEAPFROG_XEED2015 1323 // Leapfrog Xeed 2015
|
||||
#define BOARD_PICA_REVB 1324 // PICA Shield (original version)
|
||||
#define BOARD_PICA 1325 // PICA Shield (rev C or later)
|
||||
#define BOARD_INTAMSYS40 1326 // Intamsys 4.0 (Funmat HT)
|
||||
#define BOARD_MALYAN_M180 1327 // Malyan M180 Mainboard Version 2 (no display function, direct G-code only)
|
||||
#define BOARD_GT2560_V4_A20 1328 // Geeetech GT2560 Rev B for A20(M/T/D)
|
||||
#define BOARD_PROTONEER_CNC_SHIELD_V3 1329 // Mega controller & Protoneer CNC Shield V3.00
|
||||
#define BOARD_WEEDO_62A 1330 // WEEDO 62A board (TINA2, Monoprice Cadet, etc.)
|
||||
|
||||
//
|
||||
// ATmega1281, ATmega2561
|
||||
//
|
||||
|
||||
#define BOARD_MINITRONICS 1400 // Minitronics v1.0/1.1
|
||||
#define BOARD_SILVER_GATE 1401 // Silvergate v1.0
|
||||
|
||||
//
|
||||
// Sanguinololu and Derivatives - ATmega644P, ATmega1284P
|
||||
//
|
||||
|
||||
#define BOARD_SANGUINOLOLU_11 1500 // Sanguinololu < 1.2
|
||||
#define BOARD_SANGUINOLOLU_12 1501 // Sanguinololu 1.2 and above
|
||||
#define BOARD_MELZI 1502 // Melzi
|
||||
#define BOARD_MELZI_V2 1503 // Melzi V2
|
||||
#define BOARD_MELZI_MAKR3D 1504 // Melzi with ATmega1284 (MaKr3d version)
|
||||
#define BOARD_MELZI_CREALITY 1505 // Melzi Creality3D (for CR-10 etc)
|
||||
#define BOARD_MELZI_MALYAN 1506 // Melzi Malyan M150
|
||||
#define BOARD_MELZI_TRONXY 1507 // Tronxy X5S
|
||||
#define BOARD_STB_11 1508 // STB V1.1
|
||||
#define BOARD_AZTEEG_X1 1509 // Azteeg X1
|
||||
#define BOARD_ANET_10 1510 // Anet 1.0 (Melzi clone)
|
||||
#define BOARD_ZMIB_V2 1511 // ZoneStar ZMIB V2
|
||||
|
||||
//
|
||||
// Other ATmega644P, ATmega644, ATmega1284P
|
||||
//
|
||||
|
||||
#define BOARD_GEN3_MONOLITHIC 1600 // Gen3 Monolithic Electronics
|
||||
#define BOARD_GEN3_PLUS 1601 // Gen3+
|
||||
#define BOARD_GEN6 1602 // Gen6
|
||||
#define BOARD_GEN6_DELUXE 1603 // Gen6 deluxe
|
||||
#define BOARD_GEN7_CUSTOM 1604 // Gen7 custom (Alfons3 Version) https://github.com/Alfons3/Generation_7_Electronics
|
||||
#define BOARD_GEN7_12 1605 // Gen7 v1.1, v1.2
|
||||
#define BOARD_GEN7_13 1606 // Gen7 v1.3
|
||||
#define BOARD_GEN7_14 1607 // Gen7 v1.4
|
||||
#define BOARD_OMCA_A 1608 // Alpha OMCA
|
||||
#define BOARD_OMCA 1609 // Final OMCA
|
||||
#define BOARD_SETHI 1610 // Sethi 3D_1
|
||||
|
||||
//
|
||||
// Teensyduino - AT90USB1286, AT90USB1286P
|
||||
//
|
||||
|
||||
#define BOARD_TEENSYLU 1700 // Teensylu
|
||||
#define BOARD_PRINTRBOARD 1701 // Printrboard (AT90USB1286)
|
||||
#define BOARD_PRINTRBOARD_REVF 1702 // Printrboard Revision F (AT90USB1286)
|
||||
#define BOARD_BRAINWAVE 1703 // Brainwave (AT90USB646)
|
||||
#define BOARD_BRAINWAVE_PRO 1704 // Brainwave Pro (AT90USB1286)
|
||||
#define BOARD_SAV_MKI 1705 // SAV Mk-I (AT90USB1286)
|
||||
#define BOARD_TEENSY2 1706 // Teensy++2.0 (AT90USB1286)
|
||||
#define BOARD_5DPRINT 1707 // 5DPrint D8 Driver Board
|
||||
|
||||
//
|
||||
// LPC1768 ARM Cortex-M3
|
||||
//
|
||||
|
||||
#define BOARD_RAMPS_14_RE_ARM_EFB 2000 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_14_RE_ARM_EEB 2001 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_14_RE_ARM_EFF 2002 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_14_RE_ARM_EEF 2003 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_14_RE_ARM_SF 2004 // Re-ARM with RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_MKS_SBASE 2005 // MKS-Sbase
|
||||
#define BOARD_AZSMZ_MINI 2006 // AZSMZ Mini
|
||||
#define BOARD_BIQU_BQ111_A4 2007 // BIQU BQ111-A4
|
||||
#define BOARD_SELENA_COMPACT 2008 // Selena Compact
|
||||
#define BOARD_BIQU_B300_V1_0 2009 // BIQU B300_V1.0
|
||||
#define BOARD_MKS_SGEN_L 2010 // MKS-SGen-L
|
||||
#define BOARD_GMARSH_X6_REV1 2011 // GMARSH X6, revision 1 prototype
|
||||
#define BOARD_BTT_SKR_V1_1 2012 // BigTreeTech SKR v1.1
|
||||
#define BOARD_BTT_SKR_V1_3 2013 // BigTreeTech SKR v1.3
|
||||
#define BOARD_BTT_SKR_V1_4 2014 // BigTreeTech SKR v1.4
|
||||
#define BOARD_EMOTRONIC 2015 // eMotion-Tech eMotronic
|
||||
|
||||
//
|
||||
// LPC1769 ARM Cortex-M3
|
||||
//
|
||||
|
||||
#define BOARD_MKS_SGEN 2500 // MKS-SGen
|
||||
#define BOARD_AZTEEG_X5_GT 2501 // Azteeg X5 GT
|
||||
#define BOARD_AZTEEG_X5_MINI 2502 // Azteeg X5 Mini
|
||||
#define BOARD_AZTEEG_X5_MINI_WIFI 2503 // Azteeg X5 Mini Wifi
|
||||
#define BOARD_COHESION3D_REMIX 2504 // Cohesion3D ReMix
|
||||
#define BOARD_COHESION3D_MINI 2505 // Cohesion3D Mini
|
||||
#define BOARD_SMOOTHIEBOARD 2506 // Smoothieboard
|
||||
#define BOARD_TH3D_EZBOARD 2507 // TH3D EZBoard v1.0
|
||||
#define BOARD_BTT_SKR_V1_4_TURBO 2508 // BigTreeTech SKR v1.4 TURBO
|
||||
#define BOARD_MKS_SGEN_L_V2 2509 // MKS SGEN_L V2
|
||||
#define BOARD_BTT_SKR_E3_TURBO 2510 // BigTreeTech SKR E3 Turbo
|
||||
#define BOARD_FLY_CDY 2511 // FLYmaker FLY CDY
|
||||
|
||||
//
|
||||
// SAM3X8E ARM Cortex-M3
|
||||
//
|
||||
|
||||
#define BOARD_DUE3DOM 3000 // DUE3DOM for Arduino DUE
|
||||
#define BOARD_DUE3DOM_MINI 3001 // DUE3DOM MINI for Arduino DUE
|
||||
#define BOARD_RADDS 3002 // RADDS
|
||||
#define BOARD_RAMPS_FD_V1 3003 // RAMPS-FD v1
|
||||
#define BOARD_RAMPS_FD_V2 3004 // RAMPS-FD v2
|
||||
#define BOARD_RAMPS_SMART_EFB 3005 // RAMPS-SMART (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_SMART_EEB 3006 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_SMART_EFF 3007 // RAMPS-SMART (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_SMART_EEF 3008 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_SMART_SF 3009 // RAMPS-SMART (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_RAMPS_DUO_EFB 3010 // RAMPS Duo (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_DUO_EEB 3011 // RAMPS Duo (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_DUO_EFF 3012 // RAMPS Duo (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_DUO_EEF 3013 // RAMPS Duo (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_DUO_SF 3014 // RAMPS Duo (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_RAMPS4DUE_EFB 3015 // RAMPS4DUE (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS4DUE_EEB 3016 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS4DUE_EFF 3017 // RAMPS4DUE (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS4DUE_EEF 3018 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS4DUE_SF 3019 // RAMPS4DUE (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_RURAMPS4D_11 3020 // RuRAMPS4Duo v1.1
|
||||
#define BOARD_RURAMPS4D_13 3021 // RuRAMPS4Duo v1.3
|
||||
#define BOARD_ULTRATRONICS_PRO 3022 // ReprapWorld Ultratronics Pro V1.0
|
||||
#define BOARD_ARCHIM1 3023 // UltiMachine Archim1 (with DRV8825 drivers)
|
||||
#define BOARD_ARCHIM2 3024 // UltiMachine Archim2 (with TMC2130 drivers)
|
||||
#define BOARD_ALLIGATOR 3025 // Alligator Board R2
|
||||
#define BOARD_CNCONTROLS_15D 3026 // Cartesio CN Controls V15 on DUE
|
||||
#define BOARD_KRATOS32 3027 // K.3D Kratos32 (Arduino Due Shield)
|
||||
|
||||
//
|
||||
// SAM3X8C ARM Cortex-M3
|
||||
//
|
||||
|
||||
#define BOARD_PRINTRBOARD_G2 3100 // Printrboard G2
|
||||
#define BOARD_ADSK 3101 // Arduino DUE Shield Kit (ADSK)
|
||||
|
||||
//
|
||||
// STM32 ARM Cortex-M0+
|
||||
//
|
||||
|
||||
#define BOARD_BTT_EBB42_V1_1 4000 // BigTreeTech EBB42 V1.1 (STM32G0B1CB)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V3_0 4001 // BigTreeTech SKR Mini E3 V3.0 (STM32G0B0RE / STM32G0B1RE)
|
||||
#define BOARD_BTT_MANTA_E3_EZ_V1_0 4002 // BigTreeTech Manta E3 EZ V1.0 (STM32G0B1RE)
|
||||
#define BOARD_BTT_MANTA_M4P_V2_1 4003 // BigTreeTech Manta M4P V2.1 (STM32G0B0RE)
|
||||
#define BOARD_BTT_MANTA_M5P_V1_0 4004 // BigTreeTech Manta M5P V1.0 (STM32G0B1RE)
|
||||
#define BOARD_BTT_MANTA_M8P_V1_0 4005 // BigTreeTech Manta M8P V1.0 (STM32G0B1VE)
|
||||
#define BOARD_BTT_MANTA_M8P_V1_1 4006 // BigTreeTech Manta M8P V1.1 (STM32G0B1VE)
|
||||
|
||||
//
|
||||
// STM32 ARM Cortex-M3
|
||||
//
|
||||
|
||||
#define BOARD_MALYAN_M200_V2 5000 // STM32F070CB controller
|
||||
#define BOARD_MALYAN_M300 5001 // STM32F070-based delta
|
||||
#define BOARD_STM32F103RE 5002 // STM32F103RE Libmaple-based STM32F1 controller
|
||||
#define BOARD_MALYAN_M200 5003 // STM32C8 Libmaple-based STM32F1 controller
|
||||
#define BOARD_STM3R_MINI 5004 // STM32F103RE Libmaple-based STM32F1 controller
|
||||
#define BOARD_GTM32_PRO_VB 5005 // STM32F103VE controller
|
||||
#define BOARD_GTM32_MINI 5006 // STM32F103VE controller
|
||||
#define BOARD_GTM32_MINI_A30 5007 // STM32F103VE controller
|
||||
#define BOARD_GTM32_REV_B 5008 // STM32F103VE controller
|
||||
#define BOARD_MORPHEUS 5009 // STM32F103C8 / STM32F103CB Libmaple-based STM32F1 controller
|
||||
#define BOARD_CHITU3D 5010 // Chitu3D (STM32F103RE)
|
||||
#define BOARD_MKS_ROBIN 5011 // MKS Robin (STM32F103ZE)
|
||||
#define BOARD_MKS_ROBIN_MINI 5012 // MKS Robin Mini (STM32F103VE)
|
||||
#define BOARD_MKS_ROBIN_NANO 5013 // MKS Robin Nano (STM32F103VE)
|
||||
#define BOARD_MKS_ROBIN_NANO_V2 5014 // MKS Robin Nano V2 (STM32F103VE)
|
||||
#define BOARD_MKS_ROBIN_LITE 5015 // MKS Robin Lite/Lite2 (STM32F103RC)
|
||||
#define BOARD_MKS_ROBIN_LITE3 5016 // MKS Robin Lite3 (STM32F103RC)
|
||||
#define BOARD_MKS_ROBIN_PRO 5017 // MKS Robin Pro (STM32F103ZE)
|
||||
#define BOARD_MKS_ROBIN_E3 5018 // MKS Robin E3 (STM32F103RC)
|
||||
#define BOARD_MKS_ROBIN_E3_V1_1 5019 // MKS Robin E3 V1.1 (STM32F103RC)
|
||||
#define BOARD_MKS_ROBIN_E3D 5020 // MKS Robin E3D (STM32F103RC)
|
||||
#define BOARD_MKS_ROBIN_E3D_V1_1 5021 // MKS Robin E3D V1.1 (STM32F103RC)
|
||||
#define BOARD_MKS_ROBIN_E3P 5022 // MKS Robin E3P (STM32F103VE)
|
||||
#define BOARD_BTT_SKR_MINI_V1_1 5023 // BigTreeTech SKR Mini v1.1 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V1_0 5024 // BigTreeTech SKR Mini E3 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V1_2 5025 // BigTreeTech SKR Mini E3 V1.2 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_MINI_E3_V2_0 5026 // BigTreeTech SKR Mini E3 V2.0 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_BTT_SKR_MINI_MZ_V1_0 5027 // BigTreeTech SKR Mini MZ V1.0 (STM32F103RC)
|
||||
#define BOARD_BTT_SKR_E3_DIP 5028 // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_BTT_SKR_CR6 5029 // BigTreeTech SKR CR6 v1.0 (STM32F103RE)
|
||||
#define BOARD_JGAURORA_A5S_A1 5030 // JGAurora A5S A1 (STM32F103ZE)
|
||||
#define BOARD_FYSETC_AIO_II 5031 // FYSETC AIO_II (STM32F103RC)
|
||||
#define BOARD_FYSETC_CHEETAH 5032 // FYSETC Cheetah (STM32F103RC)
|
||||
#define BOARD_FYSETC_CHEETAH_V12 5033 // FYSETC Cheetah V1.2 (STM32F103RC)
|
||||
#define BOARD_LONGER3D_LK 5034 // Longer3D LK1/2 - Alfawise U20/U20+/U30 (STM32F103VE)
|
||||
#define BOARD_CCROBOT_MEEB_3DP 5035 // ccrobot-online.com MEEB_3DP (STM32F103RC)
|
||||
#define BOARD_CHITU3D_V5 5036 // Chitu3D TronXY X5SA V5 Board (STM32F103ZE)
|
||||
#define BOARD_CHITU3D_V6 5037 // Chitu3D TronXY X5SA V6 Board (STM32F103ZE)
|
||||
#define BOARD_CHITU3D_V9 5038 // Chitu3D TronXY X5SA V9 Board (STM32F103ZE)
|
||||
#define BOARD_CREALITY_V4 5039 // Creality v4.x (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V422 5040 // Creality v4.2.2 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V423 5041 // Creality v4.2.3 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V425 5042 // Creality v4.2.5 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V427 5043 // Creality v4.2.7 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V4210 5044 // Creality v4.2.10 (STM32F103RC / STM32F103RE) as found in the CR-30
|
||||
#define BOARD_CREALITY_V431 5045 // Creality v4.3.1 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_A 5046 // Creality v4.3.1a (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_B 5047 // Creality v4.3.1b (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_C 5048 // Creality v4.3.1c (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V431_D 5049 // Creality v4.3.1d (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V452 5050 // Creality v4.5.2 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V453 5051 // Creality v4.5.3 (STM32F103RC / STM32F103RE)
|
||||
#define BOARD_CREALITY_V521 5052 // Creality v5.2.1 (STM32F103VE) as found in the SV04
|
||||
#define BOARD_CREALITY_V24S1 5053 // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7
|
||||
#define BOARD_CREALITY_V24S1_301 5054 // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1
|
||||
#define BOARD_CREALITY_V25S1 5055 // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro
|
||||
#define BOARD_TRIGORILLA_PRO 5056 // Trigorilla Pro (STM32F103ZE)
|
||||
#define BOARD_FLY_MINI 5057 // FLYmaker FLY MINI (STM32F103RC)
|
||||
#define BOARD_FLSUN_HISPEED 5058 // FLSUN HiSpeedV1 (STM32F103VE)
|
||||
#define BOARD_BEAST 5059 // STM32F103RE Libmaple-based controller
|
||||
#define BOARD_MINGDA_MPX_ARM_MINI 5060 // STM32F103ZE Mingda MD-16
|
||||
#define BOARD_GTM32_PRO_VD 5061 // STM32F103VE controller
|
||||
#define BOARD_ZONESTAR_ZM3E2 5062 // Zonestar ZM3E2 (STM32F103RC)
|
||||
#define BOARD_ZONESTAR_ZM3E4 5063 // Zonestar ZM3E4 V1 (STM32F103VC)
|
||||
#define BOARD_ZONESTAR_ZM3E4V2 5064 // Zonestar ZM3E4 V2 (STM32F103VC)
|
||||
#define BOARD_ERYONE_ERY32_MINI 5065 // Eryone Ery32 mini (STM32F103VE)
|
||||
#define BOARD_PANDA_PI_V29 5066 // Panda Pi V2.9 - Standalone (STM32F103RC)
|
||||
#define BOARD_SOVOL_V131 5067 // Sovol V1.3.1 (GD32F103RE)
|
||||
|
||||
//
|
||||
// ARM Cortex-M4F
|
||||
//
|
||||
|
||||
#define BOARD_TEENSY31_32 5100 // Teensy3.1 and Teensy3.2
|
||||
#define BOARD_TEENSY35_36 5101 // Teensy3.5 and Teensy3.6
|
||||
|
||||
//
|
||||
// STM32 ARM Cortex-M4F
|
||||
//
|
||||
|
||||
#define BOARD_ARMED 5200 // Arm'ed STM32F4-based controller
|
||||
#define BOARD_RUMBA32_V1_0 5201 // RUMBA32 STM32F446VE based controller from Aus3D
|
||||
#define BOARD_RUMBA32_V1_1 5202 // RUMBA32 STM32F446VE based controller from Aus3D
|
||||
#define BOARD_RUMBA32_MKS 5203 // RUMBA32 STM32F446VE based controller from Makerbase
|
||||
#define BOARD_RUMBA32_BTT 5204 // RUMBA32 STM32F446VE based controller from BIGTREETECH
|
||||
#define BOARD_BLACK_STM32F407VE 5205 // BLACK_STM32F407VE
|
||||
#define BOARD_BLACK_STM32F407ZE 5206 // BLACK_STM32F407ZE
|
||||
#define BOARD_BTT_SKR_MINI_E3_V3_0_1 5207 // BigTreeTech SKR Mini E3 V3.0.1 (STM32F401RC)
|
||||
#define BOARD_BTT_SKR_PRO_V1_1 5208 // BigTreeTech SKR Pro v1.1 (STM32F407ZG)
|
||||
#define BOARD_BTT_SKR_PRO_V1_2 5209 // BigTreeTech SKR Pro v1.2 (STM32F407ZG)
|
||||
#define BOARD_BTT_BTT002_V1_0 5210 // BigTreeTech BTT002 v1.0 (STM32F407VG)
|
||||
#define BOARD_BTT_E3_RRF 5211 // BigTreeTech E3 RRF (STM32F407VG)
|
||||
#define BOARD_BTT_SKR_V2_0_REV_A 5212 // BigTreeTech SKR v2.0 Rev A (STM32F407VG)
|
||||
#define BOARD_BTT_SKR_V2_0_REV_B 5213 // BigTreeTech SKR v2.0 Rev B (STM32F407VG/STM32F429VG)
|
||||
#define BOARD_BTT_GTR_V1_0 5214 // BigTreeTech GTR v1.0 (STM32F407IGT)
|
||||
#define BOARD_BTT_OCTOPUS_V1_0 5215 // BigTreeTech Octopus v1.0 (STM32F446ZE)
|
||||
#define BOARD_BTT_OCTOPUS_V1_1 5216 // BigTreeTech Octopus v1.1 (STM32F446ZE)
|
||||
#define BOARD_BTT_OCTOPUS_PRO_V1_0 5217 // BigTreeTech Octopus Pro v1.0 (STM32F446ZE / STM32F429ZG)
|
||||
#define BOARD_LERDGE_K 5218 // Lerdge K (STM32F407ZG)
|
||||
#define BOARD_LERDGE_S 5219 // Lerdge S (STM32F407VE)
|
||||
#define BOARD_LERDGE_X 5220 // Lerdge X (STM32F407VE)
|
||||
#define BOARD_FYSETC_S6 5221 // FYSETC S6 (STM32F446VE)
|
||||
#define BOARD_FYSETC_S6_V2_0 5222 // FYSETC S6 v2.0 (STM32F446VE)
|
||||
#define BOARD_FYSETC_SPIDER 5223 // FYSETC Spider (STM32F446VE)
|
||||
#define BOARD_FLYF407ZG 5224 // FLYmaker FLYF407ZG (STM32F407ZG)
|
||||
#define BOARD_MKS_ROBIN2 5225 // MKS Robin2 V1.0 (STM32F407ZE)
|
||||
#define BOARD_MKS_ROBIN_PRO_V2 5226 // MKS Robin Pro V2 (STM32F407VE)
|
||||
#define BOARD_MKS_ROBIN_NANO_V3 5227 // MKS Robin Nano V3 (STM32F407VG)
|
||||
#define BOARD_MKS_ROBIN_NANO_V3_1 5228 // MKS Robin Nano V3.1 (STM32F407VE)
|
||||
#define BOARD_MKS_MONSTER8_V1 5229 // MKS Monster8 V1 (STM32F407VE)
|
||||
#define BOARD_MKS_MONSTER8_V2 5230 // MKS Monster8 V2 (STM32F407VE)
|
||||
#define BOARD_ANET_ET4 5231 // ANET ET4 V1.x (STM32F407VG)
|
||||
#define BOARD_ANET_ET4P 5232 // ANET ET4P V1.x (STM32F407VG)
|
||||
#define BOARD_FYSETC_CHEETAH_V20 5233 // FYSETC Cheetah V2.0 (STM32F401RC)
|
||||
#define BOARD_TH3D_EZBOARD_V2 5234 // TH3D EZBoard v2.0 (STM32F405RG)
|
||||
#define BOARD_OPULO_LUMEN_REV3 5235 // Opulo Lumen PnP Controller REV3 (STM32F407VE / STM32F407VG)
|
||||
#define BOARD_MKS_ROBIN_NANO_V1_3_F4 5236 // MKS Robin Nano V1.3 and MKS Robin Nano-S V1.3 (STM32F407VE)
|
||||
#define BOARD_MKS_EAGLE 5237 // MKS Eagle (STM32F407VE)
|
||||
#define BOARD_ARTILLERY_RUBY 5238 // Artillery Ruby (STM32F401RC)
|
||||
#define BOARD_FYSETC_SPIDER_V2_2 5239 // FYSETC Spider V2.2 (STM32F446VE)
|
||||
#define BOARD_CREALITY_V24S1_301F4 5240 // Creality v2.4.S1_301F4 (STM32F401RC) as found in the Ender-3 S1 F4
|
||||
#define BOARD_OPULO_LUMEN_REV4 5241 // Opulo Lumen PnP Controller REV4 (STM32F407VE / STM32F407VG)
|
||||
#define BOARD_FYSETC_SPIDER_KING407 5242 // FYSETC Spider King407 (STM32F407ZG)
|
||||
#define BOARD_MKS_SKIPR_V1 5243 // MKS SKIPR v1.0 all-in-one board (STM32F407VE)
|
||||
#define BOARD_TRONXY_V10 5244 // TRONXY V10 (STM32F446ZE)
|
||||
|
||||
//
|
||||
// ARM Cortex-M7
|
||||
//
|
||||
|
||||
#define BOARD_REMRAM_V1 6000 // RemRam v1
|
||||
#define BOARD_TEENSY41 6001 // Teensy 4.1
|
||||
#define BOARD_T41U5XBB 6002 // T41U5XBB Teensy 4.1 breakout board
|
||||
#define BOARD_NUCLEO_F767ZI 6003 // ST NUCLEO-F767ZI Dev Board
|
||||
#define BOARD_BTT_SKR_SE_BX_V2 6004 // BigTreeTech SKR SE BX V2.0 (STM32H743II)
|
||||
#define BOARD_BTT_SKR_SE_BX_V3 6005 // BigTreeTech SKR SE BX V3.0 (STM32H743II)
|
||||
#define BOARD_BTT_SKR_V3_0 6006 // BigTreeTech SKR V3.0 (STM32H743VI / STM32H723VG)
|
||||
#define BOARD_BTT_SKR_V3_0_EZ 6007 // BigTreeTech SKR V3.0 EZ (STM32H743VI / STM32H723VG)
|
||||
#define BOARD_BTT_OCTOPUS_MAX_EZ_V1_0 6008 // BigTreeTech Octopus Max EZ V1.0 (STM32H723ZE)
|
||||
|
||||
//
|
||||
// Espressif ESP32 WiFi
|
||||
//
|
||||
|
||||
#define BOARD_ESPRESSIF_ESP32 7000 // Generic ESP32
|
||||
#define BOARD_MRR_ESPA 7001 // MRR ESPA based on ESP32 (native pins only)
|
||||
#define BOARD_MRR_ESPE 7002 // MRR ESPE based on ESP32 (with I2S stepper stream)
|
||||
#define BOARD_E4D_BOX 7003 // E4d@BOX
|
||||
#define BOARD_RESP32_CUSTOM 7004 // Rutilea ESP32 custom board
|
||||
#define BOARD_FYSETC_E4 7005 // FYSETC E4
|
||||
#define BOARD_PANDA_ZHU 7006 // Panda_ZHU
|
||||
#define BOARD_PANDA_M4 7007 // Panda_M4
|
||||
#define BOARD_MKS_TINYBEE 7008 // MKS TinyBee based on ESP32 (with I2S stepper stream)
|
||||
#define BOARD_ENWI_ESPNP 7009 // enwi ESPNP based on ESP32 (with I2S stepper stream)
|
||||
|
||||
//
|
||||
// SAMD51 ARM Cortex-M4
|
||||
//
|
||||
|
||||
#define BOARD_AGCM4_RAMPS_144 7100 // RAMPS 1.4.4
|
||||
#define BOARD_BRICOLEMON_V1_0 7101 // Bricolemon
|
||||
#define BOARD_BRICOLEMON_LITE_V1_0 7102 // Bricolemon Lite
|
||||
|
||||
//
|
||||
// SAMD21 ARM Cortex-M4
|
||||
//
|
||||
|
||||
#define BOARD_MINITRONICS20 7103 // Minitronics v2.0
|
||||
|
||||
//
|
||||
// Custom board
|
||||
//
|
||||
|
||||
#define BOARD_CUSTOM 9998 // Custom pins definition for development and/or rare boards
|
||||
|
||||
//
|
||||
// Simulations
|
||||
//
|
||||
|
||||
#define BOARD_SIMULATED 9999
|
||||
|
||||
#define _MB_1(B) (defined(BOARD_##B) && MOTHERBOARD==BOARD_##B)
|
||||
#define MB(V...) DO(MB,||,V)
|
||||
Loading…
Reference in New Issue